Electric water heater Thermal KEND-50-03, continuous action, stainless steel, 50 l/h, capacity 7.8 l, 302x400x517 in, 6 kW, 380V Electric water heater Thermal KEND-50-03 of continuous action is installed in kitchens and in sales areas of catering establishments for prompt distribution of boiling water and hot water. With the help of this reliable and easy-to-use equipment, you can easily organize the prompt preparation of tea, coffee and five-minute meals. The device has small dimensions and is installed on the table. The roomy working tank of the model creates space for temporary placement of a large volume of water. Distinctive features of the electric water heater Thermal KEND-50-03: • the equipment is connected to the water supply; • the volume of the working tank is 7.8 liters; • the flow capacity of the model reaches 50 liters of water per hour; • water is heated to a temperature of + 100 ° C; • water is heated to boiling point with a fully loaded tank in no more than 6 minutes; • the protective system provides 2 ground clamps; • heating is carried out by built-in heating elements; • the heating element has a minimum watt load; • the body and chamber are made of stainless steel; • the design has the shape of a cylinder; • there is a portion dispensing tap; • the continuous-action boiler Thermal KEND-50-03 is equipped with support legs; • the control system is equipped with signal lamps for connection to the power grid, as well as for supplying voltage to the heating elements. Additional technical characteristics: Volume: 7.8 l Connection to water supply: yes Productivity: 50 l/h Material: stainless steel Maximum water temperature: +100°C Boiling time: 6 min. Efficiency of the boiler: 75% Water pressure in the water supply network: from 50 to 600 kPa Power consumption for heating water to boiling: 0.9 kW/h Dimensions: 302x400x517 in Weight: 10 kg Voltage: 380 V Power: 6 kW