Electric water heater Thermal KEND-100-03, continuous action, stainless steel, 100 l/h, capacity 7.8 l, 302x400x517 in, 9.6 kW, 380V Electric water heater Thermal KEND-100-03 of continuous action is installed in kitchens and in sales areas of catering establishments for prompt distribution of boiling water and hot water. With the help of this reliable and easy-to-use equipment, you can easily organize the prompt preparation of tea, coffee and five-minute meals. The device has small dimensions and is installed on the table. The roomy working tank of the model creates space for temporary placement of a large volume of water. Distinctive features of the electric water heater Thermal KEND-100-03: • the equipment is connected to the water supply; • the volume of the working tank is 7.8 liters; • the flow capacity of the model reaches 100 liters of water per hour; • water is heated to a temperature of +100 °C; • the design provides for 2 working cavities: a hot water collector and a boiler; • water is heated to boiling point with a full tank in no more than 4 minutes; • the control system is equipped with signal lamps, which have an indicator of connection to the network and an indicator of the heating element operation; • the body and chamber are made of stainless steel; • the design has the shape of a parallelepiped; • there is a portion dispensing tap; • the continuous boiler Thermal KEND-100-03 is equipped with support legs; • the electrical protection system provides 2 ground clamps. Additional technical characteristics: Volume: 7.8 l Connection to the water supply: yes Productivity: 100 l / h Material: stainless steel Maximum water temperature: +100 ° C Boiling time: 4 min. Efficiency of the boiler: 75% Water pressure in the water supply network: from 50 to 600 kPa Power consumption for heating water to boiling: 2 kW/h Dimensions: 302x400x517 in Weight: 10.5 kg Voltage: 380 V Power: 9.6 kW