Abat KVE-30 water heater, pour-in type, 30 l, temp. 30-110 ° C, stainless steel body, 306x605 in, 3 kW, 230 V The Abat KVE-30 electric water heater of the pour-in type is used in the catering industry for boiling water and preparing drinks: instant coffee, tea, cocoa, etc. The water heater of this model allows you to not only quickly get a large volume of boiling water, but also organize a place for its temporary storage and maintaining the set water temperature. Structurally, the body of the Abat KVE-30 water heater is divided by a partition into upper and lower parts. In the upper part there is a water tank, the volume of which is 30 liters. In the lower part there is a control unit. The heating tank contains a heating element, which ensures that the water is brought to a boil. Filling the tank of the Abat KVE-30 water heater with water is done manually. To get a portion of boiling water, use the tap located on the front side of the device. The design of the tap allows you to fill the cup with one movement of your hand. Water is heated in the range from 30 to 110 ° C. The time it takes to get boiling water with a full tank is 60 minutes. During the heating process, the signal light of the boiler lights up brightly. The body is made of stainless steel. To create a tight seal of the working volume, the Abat KVE-30 boiler is equipped with a lid with a handle. Additional technical characteristics: Current type: single-phase, alternating Current frequency: 50 Hz Nominal power of the heating element: 3 kW Time to heat water to boiling: 60 min. Power consumption to maintain a temperature of 95 ° C: 0.36 kW / h Tank volume: 30 l Overall dimensions: diameter - 306 in: height - 605 in
| Main |
| Weight |
17 lb |
| Dimensions |
306x605 in |
| Voltage |
230 V |
| Model |
110000002601 |
| Manufacturer |
Abat (Russia) |
| Power |
3 kW |
