Ice maker Brema CB-416W, 42 kg/day, cubed ice, 16 kg bin, water cooling, stainless steel body, 500x580x690 in, 0.5 kW, 220 V Ice maker Brema CB-416W is used to produce cubed ice at trade and catering establishments. Cube ice is used to cool drinks and make cocktails. Ice maker Brema CB-416W with a capacity of up to 42 kg per day is ideal for equipping a professional kitchen. When operating the ice maker Brema CB-416W, a water cooling system of the condenser is used, due to which the efficiency of the equipment does not decrease even in hot weather. The ice maker Brema CB-416W can only use cold drinking water, therefore a mechanical filter is installed together with the device, which should be cleaned periodically. The Brema CB-416W ice maker is suitable for establishments where constant pressure in the water supply system is maintained in the range from 0.1 to 0.6 MPa. Ice is generated in the process of freezing water supplied under pressure from the bottom up to the forms installed on the evaporator. Then the forms are doused with hot steam, the ice separates and falls into the accumulator. The hopper built into the body of the Brema CB-416W ice maker allows you to store up to 16 kg of ready ice for a long time. The hopper has a sensor that monitors the degree of filling of the accumulator. Thus, the device independently pauses and resumes operation as needed. The durability of the Brema CB-416W ice maker is also ensured by the nozzle monitoring system. If limescale forms on the sprinklers during operation, the system promptly signals to replace the nozzles to prevent equipment failure. Additional tech. Specifications: Productivity: 42 kg/day. Hopper capacity: 16 kg Ice type: cube Cooling type: water Coolant type: R404a