The Abat PKA 10-1/1PMF combi steamer is designed for use on sea and river vessels, as well as in catering establishments located in the coastal zone. The combi steamer has a durable, high-quality assembly. The body and all functional systems of the device are resistant to vibrations, sudden jolts, permanent pitching and other difficult conditions that are inevitable when operating equipment on board a vessel. The capacity of the chamber is 10 levels of GN 1/1 size. Gastronorm containers are not included in the kit and must be purchased separately. The Abat PKA10-1/1PMF combi steamer is equipped with a steam generator (boiler) responsible for generating steam and feeding it into the chamber in finished form. The use of steam is relevant for heat treatment of bakery products, as well as for creating blanks for confectionery products. Hot air, humidified with steam, evenly envelops each blank and effectively moistens its surfaces. This method of heat treatment prevents the structure of dough blanks from drying out and ensures an ideal result. The Abat PKA10-1/1PMF boiler combi steamer operates in the following main modes: 1) Convection (forced ventilation of the chamber) at t° up to +270°С. The convection mode is ideal for cooking meat, poultry, seafood and vegetables. Uniform distribution of hot air throughout the chamber is guaranteed. The built-in fan of the convection system has 5 operating speeds. 2) Steam heat treatment at temperatures up to +100°C. The steam generation mode provides ideal conditions for preparing not only bakery products, but also for heat treatment of any other food products: fruits, pasta, vegetables, eggs, etc. 3) Steam heat treatment at low temperatures (temperatures from +35 to +98°C). Operation of the combi steamer in this mode is relevant when delicate processing of products is required: when defrosting frozen products, when boiling soft-boiled eggs, when pasteurizing, canning and stewing products. 4) Combined operation mode (steam heat treatment + convection) at temperatures from +35 to +270°C. This mode optimally combines the advantages of steam generation and convection modes. It is suitable for processing all types of food products. The combined mode allows you to cook dishes without the use of fats while completely eliminating burning. Minimum weight loss of products is guaranteed. The combined mode is perfect for preparing classic main courses. 5) Heating mode Heating of products in this mode is carried out due to the simultaneous operation of air heating elements, which heat the air in the chamber, and a steam generator, which provides a larger amount of steam than in the combined mode.The reheating mode allows you to restore the structure of previously cooked and then cooled dishes and snacks. The Abat PKA10-1/1PMF combi steamer is equipped with a three-channel temperature probe, with which you can easily set the current temperature of the products at any stage of cooking. The chamber and body of the professional marine combi steamer Abat PKA10-1/1PMF are made of stainless steel. The door is equipped with heat-resistant glass and is equipped with a mechanism for locking in the open position. Additionally, the door of the device has a built-in two-way opening mechanism, ensuring operator safety and preventing a sharp release of steam when opening. The electronic control system is presented in Russian. The chamber has two built-in lighting lamps. Simplicity and ease of cleaning are ensured by a semi-automatic washing system. During installation, it is possible to attach the device to the floor. Additional tech. Specifications: Current type: three-phase alternating Current frequency: 50 Hz Nominal power consumption of fan electric motors: 0.37 kW Nominal power consumption of air heating elements: 12 kW Number of air heating elements: 3 pcs. Nominal power consumption of steam generator heating elements: 9 kW Number of steam generator heating elements: 3 pcs. Number of fan speeds: 5 Nominal power of lighting lamps: 2x25=50 W Illumination in the combi steamer chamber: 300 lux Maximum number of installed GN 1/1 gastronorm containers (no more than 65 in deep): 10 pcs. Combi steamer heating time to temperature: in convection mode (dry heating) plus (240) ° C – 8 min. : in steam mode plus (100) ° C – 9 min. : in low-temperature steam mode plus (98)°C – 9 min. : in combined mode plus (250)°C – 14 min. Power consumption to maintain temperature: in convection mode (dry heating) plus (270)°C – 3 kW/h : in steam mode plus (100)°C – 3.3 kW/h : in low-temperature steam mode plus (98)°C – 3.2 kW/h : in combined mode plus (250)°C – 6 kW/h Water pressure in the water supply system: from 100 to 589 kPa (from 1 to 6 kgf/cm²) Water consumption when operating in the "Steam" mode: from 6 to 7 l/hour Material: stainless steel Average service life of the combi steamer: 12 years Nominal design load on the functional container GN1/1x40: 3 kgThe electronic control system is presented in Russian. The chamber has two built-in lighting lamps. Simple and easy cleaning is ensured by a semi-automatic washing system. During installation, it is possible to fix the device to the floor. Additional technical characteristics: Current type: three-phase alternating Current frequency: 50 Hz Nominal power consumption of fan electric motors: 0.37 kW Nominal power consumption of air heating elements: 12 kW Number of air heating elements: 3 pcs. Nominal power consumption of steam generator heating elements: 9 kW Number of steam generator heating elements: 3 pcs. Number of fan speeds: 5 Nominal power of lighting lamps: 2x25=50 W Illumination in the combi steamer chamber: 300 lux Maximum number of installed GN 1/1 gastronorm containers (no more than 65 in deep): 10 pcs. Time for heating up the combi steamer to temperature: in convection mode (dry heating) plus (240)°C – 8 min. : in steam mode plus (100)°C – 9 min. : in steam mode at low temperature plus (98)°C – 9 min. : in combined mode plus (250)°C – 14 min. Power consumption to maintain temperature: in convection mode (dry heating) plus (270) °C - 3 kW / h: in steam mode plus (100) °C - 3.3 kW / h: in steam mode at a low temperature plus (98) °C - 3.2 kW / h: in combined mode plus (250) °C - 6 kW / h Water pressure in the water supply system: from 100 to 589 kPa (from 1 to 6 kgf / cm²) Water consumption when operating in the "Steam" mode: from 6 to 7 l / h Material: stainless steel Average service life of the combi steamer: 12 years Nominal design load on the functional container GN1 / 1x40: 3 kgThe electronic control system is presented in Russian. The chamber has two built-in lighting lamps. Simple and easy cleaning is ensured by a semi-automatic washing system. During installation, it is possible to fix the device to the floor. Additional technical characteristics: Current type: three-phase alternating Current frequency: 50 Hz Nominal power consumption of fan electric motors: 0.37 kW Nominal power consumption of air heating elements: 12 kW Number of air heating elements: 3 pcs. Nominal power consumption of steam generator heating elements: 9 kW Number of steam generator heating elements: 3 pcs. Number of fan speeds: 5 Nominal power of lighting lamps: 2x25=50 W Illumination in the combi steamer chamber: 300 lux Maximum number of installed GN 1/1 gastronorm containers (no more than 65 in deep): 10 pcs. Time for heating up the combi steamer to temperature: in convection mode (dry heating) plus (240)°C – 8 min. : in steam mode plus (100)°C – 9 min. : in steam mode at low temperature plus (98)°C – 9 min. : in combined mode plus (250)°C – 14 min. Power consumption to maintain temperature: in convection mode (dry heating) plus (270) °C - 3 kW / h: in steam mode plus (100) °C - 3.3 kW / h: in steam mode at a low temperature plus (98) °C - 3.2 kW / h: in combined mode plus (250) °C - 6 kW / h Water pressure in the water supply system: from 100 to 589 kPa (from 1 to 6 kgf / cm²) Water consumption when operating in the "Steam" mode: from 6 to 7 l / h Material: stainless steel Average service life of the combi steamer: 12 years Nominal design load on the functional container GN1 / 1x40: 3 kgfrom 100 to 589 kPa (from 1 to 6 kgf/cm²) Water consumption when operating in the "Steam" mode: from 6 to 7 l/hour Material: stainless steel Average service life of the combi steamer: 12 years Nominal design load on the functional container GN1/1x40: 3 kgfrom 100 to 589 kPa (from 1 to 6 kgf/cm²) Water consumption when operating in the "Steam" mode: from 6 to 7 l/hour Material: stainless steel Average service life of the combi steamer: 12 years Nominal design load on the functional container GN1/1x40: 3 kg