Gastrorag PCF-38HM water heater, 3.4 l, 3 dispensing methods (manual pump, electric pump, pressing the lever with a cup), heating and re-boiling function, stainless steel/plastic, 245x245x385 in, 0.82 kW, 220 V Gastrorag PCF-38HM water heater is used for heating and portioned water distribution in cafes and restaurants. The equipment provides heating and permanent maintenance of the temperature level of water. The use of such a device is relevant for the prompt brewing of drinks and fast food. The use of the model is possible everywhere due to its operation from a standard single-phase electric network with a voltage of 220 V. Distinctive features of the model: • the water heater heats water at a rate of at least 8.2 l / hour; • double walls of the body and water tank provide better maintenance of the temperature level at a set value; • the working capacity is 3.4 liters; • the model is equipped with a dechlorination function; • the possibility of re-boiling is provided; • hot water can be dispensed manually or using an electric pump; • if there is no water in the tank, the boiler stops heating; • the heating element has a closed design; • there is a drain cock and a drip collector; • the body is partly made of stainless steel, partly of plastic. Additional technical characteristics: Volume: 3.4 l Heating time to +97°C: 25 min. Body material: stainless steel/plastic Dimensions: 245x245x385 in Weight: 2.74 kg Voltage: 220 V Power: 0.82 kW