Heated display case Abat VTN-70, tabletop, GN 1/1 - 3 pcs., GN 1/3 - 5 pcs., 1120x700x872 in, 2.27 kW, 230 V Heated display case Abat VTN-70 is used in trade and public catering to display food products and keep them warm. The display case is perfect for selling baked goods, pizza, bakery products, as well as main courses and side dishes. The Abat VTN-70 display case can be used to display any dishes served warm. The tabletop display case is also perfect for placing gravies and sauces. Using the display case will allow you to simplify and speed up customer service (because you will not need to waste time warming up the products), as well as demonstrate the available range of goods to visitors. The Abat VTN-70 tabletop heated display case is an excellent tool for fast, intensive sales. The installation of the display case in the sales area is variable. The best way to make the most of the functionality of the heated display case is to install it as part of the serving line in the sales area, in close proximity to the cash register. The design of the display case allows for the placement of gastronorm containers of various sizes in its chamber. Gastronorm containers are installed on 2 shelves of the display case, which have the same length, but different in size of the display area. The lower shelf is approximately 1.5 times wider than the upper one, so it is convenient to install large-sized containers on it, in particular GN 1/1 gastronorm containers with a depth of 40 in. The upper shelf of the heated display case is ideal for placing GN 1/3 gastronorm containers. Air heating in the working volume of the display case is performed by 3 heating elements built into the bottom of the chamber, as well as 2 heating elements installed under the upper shelf. The system of distribution of heating elements and their placement directly under the display surfaces ensures rapid heating of products and effective maintenance of their high temperature. Temperature regulation in the working chamber is carried out in the range from +20 to +80°С. The control system is located on the operator's side. Access to the display space of the showcase is provided from the back of the body, through 2 sliding glass doors. To ensure good visibility of each dish, 5 lighting lamps are built into the chamber, which are evenly distributed throughout the working volume. The lamps create excellent illumination in the internal working space, and due to this, the showcase can be installed in rooms with subdued lighting. The front side of the showcase is a curved glass surface, which visually slightly distorts the visible goods and visually increases the volume of products placed in the chamber. The design of the Abat VTH-70 heated display case is equipped with height-adjustable legs, which will allow you to easily neutralize any unevenness on the surface of the stand or neutral table. The Abat VTN-70 heated tabletop display case comes complete with: • GN1/1-40 gastronorm container – 3 pcs. • GN1/3-20 gastronorm container – 5 pcs. Additional tech.Specifications: Current type: single-phase alternating Current frequency: 50 Hz Nominal power consumption of the display case: Heating elements – 2000 W: lighting lamps - 3x50+2x60=270 W Number of heating elements: 5 pcs. Number of thermostats: 2 pcs. Power consumption for maintaining temperature: 1 kW/h Air temperature control range in the chamber: from 20 to 80°С Operating temperature on the shelf when the thermostat is set to +60°С, not less than: +60°С(±10°С) Time to warm up the hot counter to operating temperature, not more than: 20 min Total combined illumination in the counter display case: 300 lux Usable volume of the display case: 0.27 m3 Demonstration area of ​​the display case: 0.93 m2 Included: GN1/1-40 gastronorm containers – 3 pcs. : GN1/3-20 gastronorm container – 5 pcs. Overall dimensions: 1120x730x870 in Total rated power consumption: 2.27 kW Nominal voltage: 230 V Weight: 85 k