CAS DL-150N scales, up to 150 kg, accuracy 1 kg, stainless steel platform 370x500 in, 420x610x710 in, power supply network/battery. CAS DL-150 scales are used in the trade sector and are often installed in warehouses or utility rooms for weighing large-sized goods. They are often purchased for installation in workshops of agricultural enterprises, as well as organizations supplying food products to the market. CAS DL-150 scales are easy to operate and reliable in operation. This model of scales is made in a floor version. Its design consists of a wide platform and a display stand. The scales are supplied with a power supply. Using the CAS DL-150 scales, you can determine the exact weight of goods weighing no more than 150 kilograms. The discreteness of the scales is 50 grams. The scales are equipped with a liquid crystal display, which shows information about automatic zero setting, tare weight, and the weight of the weighed products. One of the most useful functions of the CAS DL-150 scales is the ability to average readings with an unstable load. The scale platform is made of stainless steel. Its area is 370x500 in. The scales are equipped with an RS 232 interface, so they can be connected to compact mobile devices or a computer. The scales of this model can be powered both from an AC network (using an adapter) and from batteries, which makes them mobile. The battery life is approximately 100 hours, which allows you to use the scales for a long time in rooms where there is no connection to the power grid. The CAS DL-150 scales have a waterproof membrane keyboard. The scale platform is resistant to mechanical damage. The CAS DL-150 scales are equipped with an automatic shutdown function after several minutes of inactivity. This feature allows you to save energy significantly. The operating temperature range of this model scales is quite wide: from -10 to +40 °C. This allows using them both outdoors at low temperatures in winter or autumn, and in workshops not equipped with an air conditioning system in the hot summer. The CAS DL-150 scales are equipped with a fault diagnostic system. The scale platform has rubber feet that ensure the stability of the structure on any surface. Additional technical characteristics: Maximum weighing limit: 150 kg Verification division value and counting resolution: 50 g Power supply: from the network and from the battery Tare mass selection, no more than: 99.95 kg Operating temperature range: -10 ~ +40 °C Display type: liquid crystal Platform dimensions: 420x510 in Zero setting: yes Tare accounting: yes Counting mode: yes Comparison mode: yes