Thermal proofing cabinet Abat ШРТ-8, 8 levels 600х400 in, manual control, temp. +30…+110°С, full stainless steel, 800х601х804 in, 1.2 kW, 230 V The Abat proofing cabinet ШРТ-8 is used for preliminary processing of dough products – proofing. This type of heat treatment involves saturating the dough structure with carbon dioxide molecules, which make the dough porous, soft, fluffy and significantly increase the volume of the blanks. Proofing of dough is a necessary process that allows achieving impeccable quality of bakery and confectionery products. Installing the Abat ШРТ-8 proofing cabinet in a professional kitchen will allow you to receive large batches of products ready for further baking every day. The cabinet chamber holds 8 baking trays measuring 600х400 in. The total display area is 1.92 m2. The temperature inside the chamber can be adjusted from +30 to +110 °C, which allows the operator to set the desired value required for dough proofing in each specific case individually. The developers recommend proofing at a temperature of +50 °C and humidity levels in the chamber from 50 to 70%. A bath filled with water is used to maintain humidity in the chamber. The bath is located at the bottom of the chamber, above it there is an air heating element, which heats the air in the working volume and also helps to heat the water in the bath. The humidity level during operation of the Abat SHRT-8 proofing cabinet can vary from 50 to 90%. The Abat SHRT-8 proofing cabinet is distinguished by its economical power consumption. For example, during proofing of products at a temperature of +40 °C, only 0.5 kW is consumed. The operation of a powerful heating element allows heating the air in the chamber to an operating temperature of 40 °C in just 20 minutes. The door of the Abat ШРТ-8 proofing cabinet is made of heat-resistant glass, which practically does not heat up during the operation of the device. This feature eliminates the possibility of burn injuries to kitchen personnel. The presence of a glass door in the design allows you to conveniently monitor the proofing process. The body of the Abat ШРТ-8 proofing cabinet is made of high-quality stainless steel, so it can be used for a long time in high humidity conditions. The Abat ШРТ-8 proofing cabinet is designed for long-term operation in a multi-hour mode. Add. tech. Specifications: Type: electric Number of heating elements: 1 Capacity: 8 baking trays Baking tray area: 600x400 in Total area for display: 1.92 m2 Power consumption to maintain a temperature of +40 °C: no more than 0.5 kW Temperature range: +30 … +110 °C Usable volume of the chamber: 0.22 m3 Type of current: single-phase, alternating Current frequency: 50 Hz Number of thermostats: 1 pc. Power consumption to maintain a temperature of 40 °C: 0.6 kW / h Air temperature control range in the working chamber: from 30 to 110 °C Operating temperature on the shelves when the thermostat is set to 40 °C: 40 ± 5 °C Time to heat the chamber to an operating temperature of 40 °C: 20 min. volume of water poured into the bath:3 l Humidity level in the chamber: from 50 to 95% Permissible static load on the cabinet, no more than: 100 kg