Electric proofing cabinet МХМ ШРЭ106-01
-
$5 995
- In Stock
- Product Code: 568174925
Electric proofing cabinet МХМ ШРЭ106-01, 6 lattice shelves, glass door, stainless steel face, on a stand, with a roof, 1300х1025х830 in Electric proofing cabinet МХМ ШРЭ106-01 belongs to the category of professional kitchen equipment and is intended for proofing confectionery and small-piece bakery products. The main operating mode is proofing the product at a temperature from 30 to 90 °С. Electric proofing cabinet МХМ ШРЭ106-01 can be placed at public catering establishments independently or as part of process lines. Specifications: ШРЭ106-01 – six lattice shelves, glass door, on legs, without a roof; Useful volume of the chamber, m3 - 0.54 Number of lattice shelves, pcs. - 6 Nominal power consumption, kW - 1.25 Number of heating elements, pcs. - 2 Volume of water poured into 1 bath - no more than 1 l Number of baths - 2 pcs Humidity level in the cabinet volume - 50 : 95 % Number of installed bread molds No. 7 - 12x6 = 72 pcs. Width, in - 1300 Depth, in - 1025 Height, in - 840 Weight, kg - 127 kg. Weight in packaging - 190 kg. Design and operating principle: The product consists of a proofing chamber, lattice shelves, frame, cladding, doors, electrical equipment. The proofing chamber is made of stainless steel. The doors are made of glass. The proofing chamber contains: a temperature control device sensor, two water baths, two lighting lamps, six shelves-grids for installing bread pans. Bread pans are not included in the delivery set and are purchased separately. Heating elements are located in the lower part of the proofing chamber. Baths with water are installed above the heating elements. Proofing parameters are controlled from the control panel, which contains: a thermostat knob, a key switch and signal lamps. The terminal block is located inside the cabinet body behind the rear wall. The temperature in the proofing chamber is controlled by a thermostat. The key switch is designed to turn on (off) the lighting in the proofing chamber. The yellow signal lamp indicates heating; when the set temperature in the chamber is reached, it goes out, signaling that the set temperature has been reached. The white signal lamp indicates the presence of electricity.
| Main | |
| Model | 100110604 |
| Manufacturer | МХМ (MariHolodMash) (Russia) |
