Proofing cabinet Voskhod Briz-342, trolley 760x1010x1800mm, +30…+45C, 13kW, 380V, 2332x2010x2265mm Proofing cabinet Voskhod Briz-342 is designed for proofing bakery products and is designed to process large batches of small-piece blanks, hearth and tin bread. When working with the cabinet, rack trolleys are used, which are rolled into the chamber space. 4 or 6 trolleys can be used at a time. The working chamber of the cabinet is divided into 2 zones, each of which is equipped with a door with a viewing glass. Proofing cabinet Briz-342 of the Voskhod brand provides heating in the temperature range from +30 to +45°C. The optimal value, which is suitable for a wide range of dough products, is considered to be a temperature of +40°C. It takes no more than 25 minutes to heat the air in the chamber to the set value. The Voskhod Briz-342 thermal proofing cabinet has the following characteristics: • the front panel and both doors of the cabinet are made of high-quality stainless steel; • plastic collapsible sandwich panels were used as the material for the roof, back and side walls; • the built-in climate control guarantees maintaining the set humidity and temperature indicators throughout the chamber; • the time it takes to heat the air in the working space to the set temperature is reduced to a minimum, since the air heating elements have increased power; • the built-in steam generator maintains and controls the optimum water level automatically; • the silicone seal is attached to the doors using a profile with a special cross-section; • the degree of adhesion of the doors to the opening, as well as their height, can be easily adjusted thanks to specially designed hinges; • the Eliwell control system provides stable control of humidity and temperature in the chamber; • emergency shutdown (and subsequent switching on) of the equipment in case of power failures in the power grid is possible using the "START" and "STOP" buttons; • Voskhod proofing cabinets can be installed next to each other almost closely, with a minimum gap of 5 cm between the walls of the case; • the maintenance area is located on the front side of the equipment case, so if technical work is necessary, the condition of the equipment can be checked without moving the entire structure. The Voskhod Briz-342 proofing cabinet for baking is supplied in a disassembled structure and is easy to assemble due to the fact that almost the entire structure of the equipment consists of prefabricated sandwich panels. The proofing cabinet can be operated using rack trolleys of the TS-1, TS-2, TS-7, TS-8 models. The following professional ovens are best suited for baking products after the proofing process: Voskhod: Musson Rotor 99, 99K, 99E, 99EK, 77, 77E, 350. The number of trolleys that can be placed in the chamber depends on their model: TS-8 - 4 pcs., TS-7 - 4 pcs., TS-2 - 4 pcs., TS-1 - 6 pcs. Additional technical specifications: Capacity of rack trolleys: 2 pcs.Maximum dimensions of the rolled-up rack trolley: 760x1010x1800 in Doorway dimensions: 810x1830 in Steam humidification: yes Temperature range: from +30 to +45°С Relative air humidity: from 60 to 90% Control type: electronic Time to heat the cabinet to a temperature of 40°С: no more than 25 min. Voltage: 380 V Current type: 3NPE~ Power: 13 kW Dimensions: 2332x2010x2265 in Net weight: 600 kg