Proofing cabinet Voskhod Briz-122, trolley 760x930x1800mm, +30…+45C, 7.3 kW, 380V, 2010x1193x2265mm Proofing cabinet Voskhod Briz-122 is professional equipment for proofing bread products, as well as small-piece dough products. Preliminary proofing is necessary, every baker knows this. And this means that proofing cabinets must be installed in canteens, bakeries and bakery workshops. Proofing cabinet Briz-122 Voskhod is designed for laying out products on baking sheets of 2 mobile trolleys-pins, which rotate during proofing. The design of the cabinet includes 2 doors, each of which accommodates 1 trolley with baking sheets. Viewing windows made of impact-resistant heat-resistant glass are built into the structure of the doors. The process of lifting the blanks is clearly visible through the layer of this transparent glass, so there is no need to open the doors. In addition, a powerful lighting system provides the best visibility at each level. The Voskhod Briz-122 thermal proofing cabinet carries out heating within the range from +30 to +45°C. High-power air heating elements provide the fastest possible heating of the air in the entire chamber. The heating time to +40°C is 25 minutes. Heating is only one factor of proofing. The second is air humidification with steam. Steam is supplied to the chamber from the built-in steam generator. The Voskhod Briz-122 proofing cabinet for baking has the following design features: • the body is filled from the inside with non-hygroscopic material for improved thermal insulation; • the chamber and body coatings are made of stainless steel; • the cabinet has a built-in climatizer - a device that sets and maintains the set operating parameters; • the required water level is automatically maintained in the steam generator throughout the entire working cycle; • the Voskhod Briz-222 thermal proofing cabinet is equipped with lightweight doors; • the doors are equipped with a seal that is attached to their surfaces using a special section profile; the presence of the seal guarantees absolute tightness of the chamber space; • the cabinet doors can be adjusted in height and in the degree of fit to the doorway. This was made possible by hinges of a special design; • the structure of the seal is not damaged when rolling the trolleys-studs into the chamber; • Eliwell brand control devices maintain the temperature and humidity at the set levels automatically; • the control panel has the STOP and START buttons. They are necessary for prompt intervention in the proofing cabinet in case of voltage drops in the electrical network; • access to the maintenance area is located in the upper part of the body, therefore, if technical work is necessary, the proofing cabinet does not need to be moved. The Voskhod Briz-222 thermal proofing cabinet is supplied disassembled. Its structure is designed from easy-to-assemble elements. Using the instructions, you can assemble the equipment without specialists, on your own. Additional tech.Specifications: Capacity of rack trolleys: 2 pcs. Maximum dimensions of the rolled-up rack trolley: 760x930x1800 in Dimensions of doorways: 810x1830 in Steam humidification: yes Temperature range: from +30 to +45°С Relative air humidity: from 60 to 90% Control type: electronic Time to heat the cabinet to a temperature of 40°С: no more than 25 min. Dimensions in packaging: 2170x1390x1200 in Voltage: 380 V Current type: 3NPE~ Power: 7.3 kW Dimensions: 2010x1193x2265 in Dimensions in packaging: 2170x1390x1200 in Net weight: 450 kg