Proofing cabinet ШРЭ68 Proofing cabinet ШРЭ68 belongs to the category of professional kitchen equipment and is intended for proofing small-piece bakery and confectionery products. The main operating mode is product proofing at a temperature of 30 to 90 °С. Proofing cabinet ШРЭ68 can be located at catering establishments independently or as part of technological lines. ШРЭ68 – 600 series, Plant code - 100106801 Weight, kg - 43 kg. Weight in packaging - 76 kg. Dimensions (LxWxH) - 600x600x800 in Dimensions in packaging (LxWxH) - 990x800x750 in Proofing cabinet ШРЭ68 is a chamber, which consists of a frame, cladding, base, door, control panel, electrical equipment. The proofing chamber is made of stainless steel. The door is made of glass. Inside the proofing chamber there are: a thermostat sensor, a water bath, a heating element, non-removable composite guides with 8 levels for installing baking sheets - 410x290 or 450x340 in. Baking sheets are not included in the delivery set and are purchased separately. The heating element is located in the lower part of the proofing chamber. A bath with water is installed above the heating element. The proofing parameters are controlled from the top using the control panel, which contains: a thermostat knob, a white signal lamp "Network", a yellow signal lamp "Work". The terminal block is located inside the cabinet body behind the rear wall. The equipotential bolt is located on the base at the back and is marked with the corresponding sign. The temperature in the proofing chamber is controlled by a thermostat. The yellow signal lamp indicates that the heating element is heating up; when the set temperature in the chamber is reached, it goes out, signaling that the set temperature has been reached. The white signal lamp indicates the presence of electricity. The product has height-adjustable supports.