Glazing machine StanGrad MG-3
-
$101 970
- In Stock
- Product Code: 741549963
Glazing machine StanGrad MG-3, coating layer 1.5-2.2 in, loading 100 l, conveyor width 820 in, 10 kW, 2000x1800x1900 in Glazing machine StanGrad MG-3 is used for coating confectionery products (sweets, pastries, cakes, cookies, wafers, jelly products, gingerbread) with chocolate glaze with or without additives. Only chocolate or chocolate mixtures with additives to change the taste, color and smell of the glaze can be used as glaze. The device is suitable for installation on the territory of any enterprise where the above-mentioned products are manufactured. The equipment has a simple and easy-to-use control panel equipped with captions in Russian, so it will be easy for personnel to master the operation of the machine. Glazing machine StanGrad MG-3 has the following features of use and operation: • an electronic thermostat is provided to regulate the temperature of the glaze; It will allow the operator to set the temperature of the mass as accurately as possible and is guaranteed to maintain this value at a given level; • the design is equipped with a Mitsubishi drive, which has a frequency control function; the drive allows you to change the volume of the supplied glaze mass; • the speed of the mesh conveyor belt can be adjusted; • there is a zone separating the mesh and cooling conveyors, passing through which the glaze becomes hard and does not stick to the surfaces of the equipment. The operating process of the StanGrad MG-3 glazing machine consists of the following simple steps: • first, the roll-out receiving container is filled with glaze, ensuring heating of the entire mass to the set temperature level; the operator can also change the temperature value if necessary; • the variable frequency drive manufactured by Mitsubishi allows you to change the volume of glaze supplied through the nozzles; • the speed of the conveyor belt is easily adjusted using the control panel; • passing through a special "warm" zone located between the mesh and cooling conveyors, products with glaze do not freeze to the surfaces of the equipment. The whole process is clear and simple. After glazing, the products are dried and fed to the dispensing section. All equipment elements are made of safe materials that are approved for use in food production areas. The delivery set includes a warranty card and a technical passport. Specifications: Productivity (area covered with a layer of 1.5-2.2 in): estimated Conveyor mesh width: 820 in Mesh speed: from 0.4 to m/min Loading capacity: 100 l Overall dimensions: 2000x1800x1900 in Power: 10 kW Weight: 500 kg
| Main | |
| Weight | 1103 lb |
| Dimensions | 2000x1800x1900 in |
| Manufacturer | StanGrad (Russia) |
| Power | 10 kW |
